Northbridge Heatsink
2007
![]() |
![]() Genuine Apple MacPro A1186 Northbridge Heatsink 076 1305 Working USA US $74.95
|
![]() 23A61V5002 Acer Heatsink Northbridge US $53.95
|
![]() Zalman ZM NB47J Northbridge Chipset Heatsink US $39.95
|
![]() K000040090 Toshiba Tos North Bridge Heat Sink US $24.95
|
![]() Enzotech CNB S1 One Piece Copper Northbridge Heatsink US $19.75
|
![]() Enzotech CNB S1L Low Profile Northbridge Heatsink US $19.75
|
![]() Enzotech Low Profile Northbridge Heatsink CNB S1L US $19.75
|
![]() Enzotech CNB S1 One Piece Northbridge Heatsink Copper US $19.75
|
![]() Copper NorthBridge Cooler Cooling Fan Heatsink US $16.69
|
![]() Northbridge Heat Sinks Lot Of 12 US $15.00
|
![]() Zalman ZM NB47J Northbridge Chipset Heatsink NEW US $9.00
|
![]() Zalman ZM NB47J Northbridge Southbridge Chipset Heatsink US $14.99
|
![]() 1 PCS 37mm x 37mm x 6mm NORTHBRIDGE HEATSINK USED US $9.78
|
![]() 1 PCS 42mm x 42mm x 30mm NORTHBRIDGE HEATSINK ASUS USED US $9.78
|
![]() Foxconn Motherboard Northbridge Heatsink with retention clip US $4.40
|
![]() 37mm x 37mm x 6mm NORTHBRIDGE HEATSINK Stick On FREE S H US $3.99
|
![]() 37mm x 37mm x 6mm NORTHBRIDGE HEATSINK Stick On NEW US $2.49
|
![]() Dell Optiplex GX520 Northbridge Heatsink US $2.25
|
| < |
Heatsink fell off inside computer?
So I was opening up my case to clean out my fans and noticed a small silver heatsink laying free at the bottom of my case. I looked around and it looks like it fell off either the northbridge or southbridge, and when I touched what I thought it fell off it, the chip itself burned the tip of my finger. And I barely touched it. This can't be good, should I put it back on? And with what? Super glue?
You dont use super glue. You need a thermal adhesive. The super glue wont allow proper heat transfer. Here's what I use for permanently applying heatsinks to chips-
A thermal epoxy:
http://www.newegg.com/Product/Product.aspx?Item=N82E16835100005
EVGA 780i SLI FTW Northbridge Cooler Mod


US $74.95



















